SALE Quick view Details MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook MSRP: Was: $2.50 Now: $2.35 Choose Options Compare
Quick view Details MiniScience | sku: IPP Plastic pulleys on metal assembled frames MSRP: Now: $20.00 Add to Cart Compare Quick view Details MiniScience | sku: BELT54 Rubber belt for motor pulleys MSRP: Now: $0.35 Add to Cart Compare SALE Quick view Details MiniScience | sku: P51032 Plastic Pulley on Rod MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 MSRP: Now: $8.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 MSRP: Now: $8.00 Add to Cart Compare Quick view Details MiniScience Motor Pulley, Black, 13 mm, Pack of 10 MSRP: Now: $7.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 MSRP: Now: $5.00 Add to Cart Compare Quick view Details MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp MSRP: Now: $45.00 Add to Cart Compare Quick view Details MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal MSRP: Now: $19.95 Add to Cart Compare Quick view Details MiniScience | sku: LC531 Bench Mount Pulley MSRP: Now: $10.50 Add to Cart Compare Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view Details MiniScience | sku: BELT54 Rubber belt for motor pulleys MSRP: Now: $0.35 Add to Cart Compare SALE Quick view Details MiniScience | sku: P51032 Plastic Pulley on Rod MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 MSRP: Now: $8.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 MSRP: Now: $8.00 Add to Cart Compare Quick view Details MiniScience Motor Pulley, Black, 13 mm, Pack of 10 MSRP: Now: $7.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 MSRP: Now: $5.00 Add to Cart Compare Quick view Details MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp MSRP: Now: $45.00 Add to Cart Compare Quick view Details MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal MSRP: Now: $19.95 Add to Cart Compare Quick view Details MiniScience | sku: LC531 Bench Mount Pulley MSRP: Now: $10.50 Add to Cart Compare Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
SALE Quick view Details MiniScience | sku: P51032 Plastic Pulley on Rod MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare
Quick view Details MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 MSRP: Now: $8.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 MSRP: Now: $8.00 Add to Cart Compare Quick view Details MiniScience Motor Pulley, Black, 13 mm, Pack of 10 MSRP: Now: $7.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 MSRP: Now: $5.00 Add to Cart Compare Quick view Details MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp MSRP: Now: $45.00 Add to Cart Compare Quick view Details MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal MSRP: Now: $19.95 Add to Cart Compare Quick view Details MiniScience | sku: LC531 Bench Mount Pulley MSRP: Now: $10.50 Add to Cart Compare Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view Details MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 MSRP: Now: $8.00 Add to Cart Compare Quick view Details MiniScience Motor Pulley, Black, 13 mm, Pack of 10 MSRP: Now: $7.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 MSRP: Now: $5.00 Add to Cart Compare Quick view Details MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp MSRP: Now: $45.00 Add to Cart Compare Quick view Details MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal MSRP: Now: $19.95 Add to Cart Compare Quick view Details MiniScience | sku: LC531 Bench Mount Pulley MSRP: Now: $10.50 Add to Cart Compare Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view Details MiniScience Motor Pulley, Black, 13 mm, Pack of 10 MSRP: Now: $7.00 Add to Cart Compare Quick view Details MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 MSRP: Now: $5.00 Add to Cart Compare Quick view Details MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp MSRP: Now: $45.00 Add to Cart Compare Quick view Details MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal MSRP: Now: $19.95 Add to Cart Compare Quick view Details MiniScience | sku: LC531 Bench Mount Pulley MSRP: Now: $10.50 Add to Cart Compare Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view Details MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 MSRP: Now: $5.00 Add to Cart Compare Quick view Details MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp MSRP: Now: $45.00 Add to Cart Compare Quick view Details MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal MSRP: Now: $19.95 Add to Cart Compare Quick view Details MiniScience | sku: LC531 Bench Mount Pulley MSRP: Now: $10.50 Add to Cart Compare Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view Details MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp MSRP: Now: $45.00 Add to Cart Compare Quick view Details MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal MSRP: Now: $19.95 Add to Cart Compare Quick view Details MiniScience | sku: LC531 Bench Mount Pulley MSRP: Now: $10.50 Add to Cart Compare Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view Details MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal MSRP: Now: $19.95 Add to Cart Compare Quick view Details MiniScience | sku: LC531 Bench Mount Pulley MSRP: Now: $10.50 Add to Cart Compare Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view Details MiniScience | sku: LC531 Bench Mount Pulley MSRP: Now: $10.50 Add to Cart Compare Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view Details MiniScience | sku: AS3467X Table Clamp for Rod MSRP: Now: $33.50 Add to Cart Compare SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
SALE Quick view MiniScience | sku: PULLEY4 Single Pulley, 40 mm diameter, Double hook Plastic pulleys on galvanized steel frames have deep V-grove and come with hooks on both ends. MSRP: Was: $2.50 Now: $2.35 Choose Options Compare
Quick view MiniScience | sku: IPP Plastic pulleys on metal assembled frames Special plastic pulleys with aluminum frame. Assembled by galvanized steel nuts and screws so that you can easily dismantle the parts without any damage. Perfect for testing new ideas as well as standard pulley experiments. This is a complete set of... MSRP: Now: $20.00 Add to Cart Compare Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view MiniScience | sku: BELT54 Rubber belt for motor pulleys Rubber belt for transferring energy from any motor pulley to any other pulley at a distance of about 7 centimeters (3 inches). The inner diameter of the circular belt is 54 millimeters (2 inches). The thickness of the belt is 1.8 mm so that it can easily... MSRP: Now: $0.35 Add to Cart Compare SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
SALE Quick view MiniScience | sku: P51032 Plastic Pulley on Rod This unit is excellent for use with an inclined plane or any other similar apparatus. It features a 4cm plastic pulley mounted on a chrome plated steel rod. Overall length is 15cm & shaft diameter is 8mm. MSRP: Was: $14.00 Now: $8.00 Add to Cart Compare
Quick view MiniScience | sku: MPUL17R Motor Pulley 17-mm Red/ Orange, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 16.5 mm and the diameter inside the groove is 13.9 mm. Overall thickness... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view MiniScience | sku: MPUL18W Motor Pulley. 18-mm White, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 18 mm and the diameter inside the groove is 16 mm. Overall thickness of... MSRP: Now: $8.00 Add to Cart Compare Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view MiniScience Motor Pulley, Black, 13 mm, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 12.7 mm and the diameter inside the groove is 10.3 mm. Overall thickness... MSRP: Now: $7.00 Add to Cart Compare Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view MiniScience | sku: MPUL10W Motor Pulley, Small Pulley for DC Motors, Pack of 10 This pulley is used for small motors with 2-mm shaft. The diameter of the bore (center hole) is 1.95 mm so that it can make a snug connection with 2-mm shafts. Outside diameter is 9.3 mm and the diameter inside the groove is 6.5 mm. Overall thickness of... MSRP: Now: $5.00 Add to Cart Compare Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view MiniScience | sku: PPRCLMP Pulley on Rod with Table Clamp This table clamp pulley is useful for experiments in which a pulley needs to be supported at various heights and angles. Pulley on rod can be removed and used separately. Designed for clamping to table edges up to 45mm thick with a thumbscrew and for... MSRP: Now: $45.00 Add to Cart Compare Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view MiniScience | sku: PULLEYTCM Table Clamp Pulley, Metal This vertical table clamp pulley consists of a 4-cm aluminum pulley mounted on a table clamp with low friction brass cone bearings. It can be used on lab tables or inclined boards for experiments involving the resolution of forces, friction, motion, etc... MSRP: Now: $19.95 Add to Cart Compare Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected × OK
Quick view MiniScience | sku: LC531 Bench Mount Pulley Horizontal bench pulley LC531 is a horizontal pulley with table clamp. It is made of sturdy cast iron frame, and 35 mm diameter metal pulley. Holds pulley in a horizontal position when mounted on the edge of a table. MSRP: Now: $10.50 Add to Cart Compare Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected
Quick view MiniScience | sku: AS3467X Table Clamp for Rod Designed for clamping to table edges up to 45mm thick with a thumbscrew and for supporting a rod with 10mm in diameter. Usually used for holding pulley with rod; however, it may be used with any other rod with 10mm in diameter. MSRP: Now: $33.50 Add to Cart Compare 1 2 3 Next 1 2 3 Next Compare Selected
