STAYBELITE ESTER No.10, Glycerol Ester of Partially Hydrogenated Wood Rosin

STAYBELITE ESTER #10, Glycerol Ester of Partially Hydrogenated Wood Rosin

 Staybelite® Ester 10 is a glycerol ester of partially hydrogenated wood rosin supplied as a pale thermoplastic tackifying resin. It provides excellent resistance to oxidation and discoloration and is used where a pale, nonoxidizing, color-stable resin is required. The resin has wide acceptance in adhesive formulations, particularly pressure-sensitive, hot melt, solvent-based, and emulsion adhesive systems. It is compatible with a broad range of thermoplastic and elastomeric materials and can be emulsified for use with natural rubber, SBR, and neoprene latex systems. Staybelite™ Ester 10-E, WX91108 is also described as an ester of hydrogenated rosin supplied in technical-grade. Typical uses extend beyond adhesives to caulks and sealants, packaging specialties, carpet applications, graphic inks, film modification, labels, tapes, plastic modification, roofing, roadmarkings, specialty tapes, tire components, wire and cable, protective coatings, and depilatory wax compounds.

Product Specifications

Applications and Benefits:

• Tackifying resin for solvent-based adhesive formulations.
• Used in hot melt adhesives based on thermoplastic and elastomeric materials.
• Used in emulsion adhesive formulations.
• Emulsion tackifier for natural rubber latex.
• Emulsion tackifier for SBR latex.
• Emulsion tackifier for neoprene latex in aqueous adhesive systems.
• Tackifier for natural rubber in industrial tape formulations.
• Tackifier for SBR in industrial tape formulations.
• Tackifier for polyisobutylene-based adhesive systems.
• Tackifier for methacrylate resin formulations.
• Used in pressure-sensitive adhesive applications.
• Used as a tackifier for surgical tape.
• Used in EVA resin-based hot melt adhesives.
• Suitable for hot melt applied barrier coatings.
• Used in chlorinated rubber finishes.
• Used in protective coating compositions.
• Component of depilatory wax compounds.
• Suitable for caulks and sealants.
• Used in packaging specialty applications.
• Suitable for carpet-related formulations.
• Used in graphic ink formulations.
• Suitable for film modification.
• Used in labels and general tape products.
• Suitable for plastic modification.
• Used in roofing formulations.
• Suitable for roadmarking formulations.
• Used in specialty tapes.
• Suitable for tire components.
• Used in wire and cable formulations.
• Pale resin color supports applications where low initial color is required.
• Excellent resistance to oxidation helps maintain resin properties during storage and use.
• High resistance to discoloration supports color-stable formulations.
• Emulsifiable for incorporation into aqueous adhesive systems.
• Provides a wide range of solubility and compatibility with adhesive formulation components.
• Bio-based resin derived from rosin feedstock.

Caution:

For intended industrial and technical use only. If small particles or dust are generated during processing or handling, combustible dust concentrations may form in air. Minimize dust generation and accumulation and keep the product tightly closed when stored. Use appropriate ventilation and personal protective equipment. Wear suitable gloves, safety glasses, and protective clothing. Use heat-resistant gloves and a face shield when handling molten material. Molten resin can cause serious skin and eye burns. Keep away from strong oxidizing agents. In case of fire, suitable extinguishing media include water spray, dry chemical, and carbon dioxide; do not use a solid water stream. Dispose of material in accordance with applicable local regulations.