SALE Quick view Details MiniScience | sku: BELL3F Electric Bell, Educational Working Model MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare
Quick view Details MiniScience | sku: SK204-3F Rheostat, Variable Resistor MSRP: Now: $4.50 Add to Cart Compare SALE Quick view Details MiniScience | sku: TINYBULB1 Sub Miniature Light Bulb (Tiny light bulb), Pack of 100 MSRP: Was: $40.00 Now: $15.00 Add to Cart Compare SALE Quick view Details MiniScience | sku: DPSTB Knife Switch, DPST, Deluxe with black Knobs MSRP: Was: $7.10 Now: $5.99 Choose Options Compare Quick view Details MiniScience | sku: 7-1850-1 SOLENOID / ELECTROMAGNET WITH IRON CORE MSRP: Now: $45.00 Add to Cart Compare SALE Quick view Details MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare SALE Quick view Details MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view Details MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view Details MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) MSRP: Was: $1.40 Now: $0.99 Choose Options Compare Quick view Details MiniScience | sku: METELECT8 Metal Electrodes Set of 8 MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: METELECT12 Metal Electrodes Set of 12 MSRP: Now: $32.00 Add to Cart Compare Quick view Details MiniScience | sku: METELECT11 Metal Electrodes Set of 11 MSRP: Now: $29.00 Add to Cart Compare SALE Quick view MiniScience | sku: BELL3F Electric Bell, Educational Working Model The educational model of electric bell is designed so that all components are exposed and students can observe, analyze and discuss how it works.All components including the electromagnet may be removed and reassembled for practice. The electric bell... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: SK204-3F Rheostat, Variable Resistor A rheostat is a variable resistor which is used to control current. They are able to vary the resistance in a circuit without interruption. The construction is very similar to the construction of a potentiometers. MSRP: Now: $4.50 Add to Cart Compare SALE Quick view MiniScience | sku: TINYBULB1 Sub Miniature Light Bulb (Tiny light bulb), Pack of 100 Tiny miniature light-bulb with attachment wires operates with 1.2 volts up to 1.5 volts (one battery) and does not require a lamp holder. The attached wires are about 10 cm (4 inches) long and the ends are stripped and tin coated for easy connection or... MSRP: Was: $40.00 Now: $15.00 Add to Cart Compare SALE Quick view MiniScience | sku: DPSTB Knife Switch, DPST, Deluxe with black Knobs This Knife Switch is double pole single throw with screw type binding posts. The base has two screw holes for mounting on a board. Good for experiments and science projects. High quality, Deluxe version. The base measures about 53mm x 75mm. MSRP: Was: $7.10 Now: $5.99 Choose Options Compare Quick view MiniScience | sku: 7-1850-1 SOLENOID / ELECTROMAGNET WITH IRON CORE SOLENOID / ELECTROMAGNET WITH IRON COREStudy the magnetic field of a current-carrying coil and discover how an iron core affects it. This device is used for many demonstrations involving electric magnets or solenoids. A plastic spool is wrapped with... MSRP: Now: $45.00 Add to Cart Compare SALE Quick view MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational Hand crank electric generator is an educational model to demonstrate how electricity is produced. The clear shell of this generator allows students to see how a combination of gears increase the number of rotations per minute (RPM) so that the small... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare SALE Quick view MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) This is the original design DPST (Double Pole Single Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. You can use it to turn off and on two... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) This is the original design SPDT (Single Pole Double Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. This switch is also known as a... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) Two alligator clips with plastic finger grips and connection screws. These alligator clips can be attached to the ends of wires gauge 14 up to gauge 28 using screw or by soldering. Comes as a pair. The price is for two alligator clips. (one red and one... MSRP: Was: $1.40 Now: $0.99 Choose Options Compare Quick view MiniScience | sku: METELECT8 Metal Electrodes Set of 8 For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: METELECT12 Metal Electrodes Set of 12 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 4-5 mm (1/8") thick... MSRP: Now: $32.00 Add to Cart Compare Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view Details MiniScience | sku: TINYBULB1 Sub Miniature Light Bulb (Tiny light bulb), Pack of 100 MSRP: Was: $40.00 Now: $15.00 Add to Cart Compare
SALE Quick view Details MiniScience | sku: DPSTB Knife Switch, DPST, Deluxe with black Knobs MSRP: Was: $7.10 Now: $5.99 Choose Options Compare
Quick view Details MiniScience | sku: 7-1850-1 SOLENOID / ELECTROMAGNET WITH IRON CORE MSRP: Now: $45.00 Add to Cart Compare SALE Quick view Details MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare SALE Quick view Details MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view Details MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view Details MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) MSRP: Was: $1.40 Now: $0.99 Choose Options Compare Quick view Details MiniScience | sku: METELECT8 Metal Electrodes Set of 8 MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: METELECT12 Metal Electrodes Set of 12 MSRP: Now: $32.00 Add to Cart Compare Quick view Details MiniScience | sku: METELECT11 Metal Electrodes Set of 11 MSRP: Now: $29.00 Add to Cart Compare SALE Quick view MiniScience | sku: BELL3F Electric Bell, Educational Working Model The educational model of electric bell is designed so that all components are exposed and students can observe, analyze and discuss how it works.All components including the electromagnet may be removed and reassembled for practice. The electric bell... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: SK204-3F Rheostat, Variable Resistor A rheostat is a variable resistor which is used to control current. They are able to vary the resistance in a circuit without interruption. The construction is very similar to the construction of a potentiometers. MSRP: Now: $4.50 Add to Cart Compare SALE Quick view MiniScience | sku: TINYBULB1 Sub Miniature Light Bulb (Tiny light bulb), Pack of 100 Tiny miniature light-bulb with attachment wires operates with 1.2 volts up to 1.5 volts (one battery) and does not require a lamp holder. The attached wires are about 10 cm (4 inches) long and the ends are stripped and tin coated for easy connection or... MSRP: Was: $40.00 Now: $15.00 Add to Cart Compare SALE Quick view MiniScience | sku: DPSTB Knife Switch, DPST, Deluxe with black Knobs This Knife Switch is double pole single throw with screw type binding posts. The base has two screw holes for mounting on a board. Good for experiments and science projects. High quality, Deluxe version. The base measures about 53mm x 75mm. MSRP: Was: $7.10 Now: $5.99 Choose Options Compare Quick view MiniScience | sku: 7-1850-1 SOLENOID / ELECTROMAGNET WITH IRON CORE SOLENOID / ELECTROMAGNET WITH IRON COREStudy the magnetic field of a current-carrying coil and discover how an iron core affects it. This device is used for many demonstrations involving electric magnets or solenoids. A plastic spool is wrapped with... MSRP: Now: $45.00 Add to Cart Compare SALE Quick view MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational Hand crank electric generator is an educational model to demonstrate how electricity is produced. The clear shell of this generator allows students to see how a combination of gears increase the number of rotations per minute (RPM) so that the small... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare SALE Quick view MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) This is the original design DPST (Double Pole Single Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. You can use it to turn off and on two... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) This is the original design SPDT (Single Pole Double Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. This switch is also known as a... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) Two alligator clips with plastic finger grips and connection screws. These alligator clips can be attached to the ends of wires gauge 14 up to gauge 28 using screw or by soldering. Comes as a pair. The price is for two alligator clips. (one red and one... MSRP: Was: $1.40 Now: $0.99 Choose Options Compare Quick view MiniScience | sku: METELECT8 Metal Electrodes Set of 8 For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: METELECT12 Metal Electrodes Set of 12 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 4-5 mm (1/8") thick... MSRP: Now: $32.00 Add to Cart Compare Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view Details MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare
SALE Quick view Details MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) MSRP: Was: $4.50 Now: $3.50 Choose Options Compare
SALE Quick view Details MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) MSRP: Was: $4.50 Now: $3.50 Choose Options Compare
SALE Quick view Details MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) MSRP: Was: $1.40 Now: $0.99 Choose Options Compare
Quick view Details MiniScience | sku: METELECT8 Metal Electrodes Set of 8 MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: METELECT12 Metal Electrodes Set of 12 MSRP: Now: $32.00 Add to Cart Compare Quick view Details MiniScience | sku: METELECT11 Metal Electrodes Set of 11 MSRP: Now: $29.00 Add to Cart Compare SALE Quick view MiniScience | sku: BELL3F Electric Bell, Educational Working Model The educational model of electric bell is designed so that all components are exposed and students can observe, analyze and discuss how it works.All components including the electromagnet may be removed and reassembled for practice. The electric bell... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: SK204-3F Rheostat, Variable Resistor A rheostat is a variable resistor which is used to control current. They are able to vary the resistance in a circuit without interruption. The construction is very similar to the construction of a potentiometers. MSRP: Now: $4.50 Add to Cart Compare SALE Quick view MiniScience | sku: TINYBULB1 Sub Miniature Light Bulb (Tiny light bulb), Pack of 100 Tiny miniature light-bulb with attachment wires operates with 1.2 volts up to 1.5 volts (one battery) and does not require a lamp holder. The attached wires are about 10 cm (4 inches) long and the ends are stripped and tin coated for easy connection or... MSRP: Was: $40.00 Now: $15.00 Add to Cart Compare SALE Quick view MiniScience | sku: DPSTB Knife Switch, DPST, Deluxe with black Knobs This Knife Switch is double pole single throw with screw type binding posts. The base has two screw holes for mounting on a board. Good for experiments and science projects. High quality, Deluxe version. The base measures about 53mm x 75mm. MSRP: Was: $7.10 Now: $5.99 Choose Options Compare Quick view MiniScience | sku: 7-1850-1 SOLENOID / ELECTROMAGNET WITH IRON CORE SOLENOID / ELECTROMAGNET WITH IRON COREStudy the magnetic field of a current-carrying coil and discover how an iron core affects it. This device is used for many demonstrations involving electric magnets or solenoids. A plastic spool is wrapped with... MSRP: Now: $45.00 Add to Cart Compare SALE Quick view MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational Hand crank electric generator is an educational model to demonstrate how electricity is produced. The clear shell of this generator allows students to see how a combination of gears increase the number of rotations per minute (RPM) so that the small... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare SALE Quick view MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) This is the original design DPST (Double Pole Single Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. You can use it to turn off and on two... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) This is the original design SPDT (Single Pole Double Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. This switch is also known as a... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) Two alligator clips with plastic finger grips and connection screws. These alligator clips can be attached to the ends of wires gauge 14 up to gauge 28 using screw or by soldering. Comes as a pair. The price is for two alligator clips. (one red and one... MSRP: Was: $1.40 Now: $0.99 Choose Options Compare Quick view MiniScience | sku: METELECT8 Metal Electrodes Set of 8 For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: METELECT12 Metal Electrodes Set of 12 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 4-5 mm (1/8") thick... MSRP: Now: $32.00 Add to Cart Compare Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details MiniScience | sku: METELECT12 Metal Electrodes Set of 12 MSRP: Now: $32.00 Add to Cart Compare Quick view Details MiniScience | sku: METELECT11 Metal Electrodes Set of 11 MSRP: Now: $29.00 Add to Cart Compare SALE Quick view MiniScience | sku: BELL3F Electric Bell, Educational Working Model The educational model of electric bell is designed so that all components are exposed and students can observe, analyze and discuss how it works.All components including the electromagnet may be removed and reassembled for practice. The electric bell... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: SK204-3F Rheostat, Variable Resistor A rheostat is a variable resistor which is used to control current. They are able to vary the resistance in a circuit without interruption. The construction is very similar to the construction of a potentiometers. MSRP: Now: $4.50 Add to Cart Compare SALE Quick view MiniScience | sku: TINYBULB1 Sub Miniature Light Bulb (Tiny light bulb), Pack of 100 Tiny miniature light-bulb with attachment wires operates with 1.2 volts up to 1.5 volts (one battery) and does not require a lamp holder. The attached wires are about 10 cm (4 inches) long and the ends are stripped and tin coated for easy connection or... MSRP: Was: $40.00 Now: $15.00 Add to Cart Compare SALE Quick view MiniScience | sku: DPSTB Knife Switch, DPST, Deluxe with black Knobs This Knife Switch is double pole single throw with screw type binding posts. The base has two screw holes for mounting on a board. Good for experiments and science projects. High quality, Deluxe version. The base measures about 53mm x 75mm. MSRP: Was: $7.10 Now: $5.99 Choose Options Compare Quick view MiniScience | sku: 7-1850-1 SOLENOID / ELECTROMAGNET WITH IRON CORE SOLENOID / ELECTROMAGNET WITH IRON COREStudy the magnetic field of a current-carrying coil and discover how an iron core affects it. This device is used for many demonstrations involving electric magnets or solenoids. A plastic spool is wrapped with... MSRP: Now: $45.00 Add to Cart Compare SALE Quick view MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational Hand crank electric generator is an educational model to demonstrate how electricity is produced. The clear shell of this generator allows students to see how a combination of gears increase the number of rotations per minute (RPM) so that the small... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare SALE Quick view MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) This is the original design DPST (Double Pole Single Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. You can use it to turn off and on two... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) This is the original design SPDT (Single Pole Double Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. This switch is also known as a... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) Two alligator clips with plastic finger grips and connection screws. These alligator clips can be attached to the ends of wires gauge 14 up to gauge 28 using screw or by soldering. Comes as a pair. The price is for two alligator clips. (one red and one... MSRP: Was: $1.40 Now: $0.99 Choose Options Compare Quick view MiniScience | sku: METELECT8 Metal Electrodes Set of 8 For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: METELECT12 Metal Electrodes Set of 12 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 4-5 mm (1/8") thick... MSRP: Now: $32.00 Add to Cart Compare Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view Details MiniScience | sku: METELECT11 Metal Electrodes Set of 11 MSRP: Now: $29.00 Add to Cart Compare SALE Quick view MiniScience | sku: BELL3F Electric Bell, Educational Working Model The educational model of electric bell is designed so that all components are exposed and students can observe, analyze and discuss how it works.All components including the electromagnet may be removed and reassembled for practice. The electric bell... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: SK204-3F Rheostat, Variable Resistor A rheostat is a variable resistor which is used to control current. They are able to vary the resistance in a circuit without interruption. The construction is very similar to the construction of a potentiometers. MSRP: Now: $4.50 Add to Cart Compare SALE Quick view MiniScience | sku: TINYBULB1 Sub Miniature Light Bulb (Tiny light bulb), Pack of 100 Tiny miniature light-bulb with attachment wires operates with 1.2 volts up to 1.5 volts (one battery) and does not require a lamp holder. The attached wires are about 10 cm (4 inches) long and the ends are stripped and tin coated for easy connection or... MSRP: Was: $40.00 Now: $15.00 Add to Cart Compare SALE Quick view MiniScience | sku: DPSTB Knife Switch, DPST, Deluxe with black Knobs This Knife Switch is double pole single throw with screw type binding posts. The base has two screw holes for mounting on a board. Good for experiments and science projects. High quality, Deluxe version. The base measures about 53mm x 75mm. MSRP: Was: $7.10 Now: $5.99 Choose Options Compare Quick view MiniScience | sku: 7-1850-1 SOLENOID / ELECTROMAGNET WITH IRON CORE SOLENOID / ELECTROMAGNET WITH IRON COREStudy the magnetic field of a current-carrying coil and discover how an iron core affects it. This device is used for many demonstrations involving electric magnets or solenoids. A plastic spool is wrapped with... MSRP: Now: $45.00 Add to Cart Compare SALE Quick view MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational Hand crank electric generator is an educational model to demonstrate how electricity is produced. The clear shell of this generator allows students to see how a combination of gears increase the number of rotations per minute (RPM) so that the small... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare SALE Quick view MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) This is the original design DPST (Double Pole Single Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. You can use it to turn off and on two... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) This is the original design SPDT (Single Pole Double Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. This switch is also known as a... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) Two alligator clips with plastic finger grips and connection screws. These alligator clips can be attached to the ends of wires gauge 14 up to gauge 28 using screw or by soldering. Comes as a pair. The price is for two alligator clips. (one red and one... MSRP: Was: $1.40 Now: $0.99 Choose Options Compare Quick view MiniScience | sku: METELECT8 Metal Electrodes Set of 8 For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: METELECT12 Metal Electrodes Set of 12 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 4-5 mm (1/8") thick... MSRP: Now: $32.00 Add to Cart Compare Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view MiniScience | sku: BELL3F Electric Bell, Educational Working Model The educational model of electric bell is designed so that all components are exposed and students can observe, analyze and discuss how it works.All components including the electromagnet may be removed and reassembled for practice. The electric bell... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare
Quick view MiniScience | sku: SK204-3F Rheostat, Variable Resistor A rheostat is a variable resistor which is used to control current. They are able to vary the resistance in a circuit without interruption. The construction is very similar to the construction of a potentiometers. MSRP: Now: $4.50 Add to Cart Compare SALE Quick view MiniScience | sku: TINYBULB1 Sub Miniature Light Bulb (Tiny light bulb), Pack of 100 Tiny miniature light-bulb with attachment wires operates with 1.2 volts up to 1.5 volts (one battery) and does not require a lamp holder. The attached wires are about 10 cm (4 inches) long and the ends are stripped and tin coated for easy connection or... MSRP: Was: $40.00 Now: $15.00 Add to Cart Compare SALE Quick view MiniScience | sku: DPSTB Knife Switch, DPST, Deluxe with black Knobs This Knife Switch is double pole single throw with screw type binding posts. The base has two screw holes for mounting on a board. Good for experiments and science projects. High quality, Deluxe version. The base measures about 53mm x 75mm. MSRP: Was: $7.10 Now: $5.99 Choose Options Compare Quick view MiniScience | sku: 7-1850-1 SOLENOID / ELECTROMAGNET WITH IRON CORE SOLENOID / ELECTROMAGNET WITH IRON COREStudy the magnetic field of a current-carrying coil and discover how an iron core affects it. This device is used for many demonstrations involving electric magnets or solenoids. A plastic spool is wrapped with... MSRP: Now: $45.00 Add to Cart Compare SALE Quick view MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational Hand crank electric generator is an educational model to demonstrate how electricity is produced. The clear shell of this generator allows students to see how a combination of gears increase the number of rotations per minute (RPM) so that the small... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare SALE Quick view MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) This is the original design DPST (Double Pole Single Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. You can use it to turn off and on two... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) This is the original design SPDT (Single Pole Double Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. This switch is also known as a... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) Two alligator clips with plastic finger grips and connection screws. These alligator clips can be attached to the ends of wires gauge 14 up to gauge 28 using screw or by soldering. Comes as a pair. The price is for two alligator clips. (one red and one... MSRP: Was: $1.40 Now: $0.99 Choose Options Compare Quick view MiniScience | sku: METELECT8 Metal Electrodes Set of 8 For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: METELECT12 Metal Electrodes Set of 12 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 4-5 mm (1/8") thick... MSRP: Now: $32.00 Add to Cart Compare Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view MiniScience | sku: TINYBULB1 Sub Miniature Light Bulb (Tiny light bulb), Pack of 100 Tiny miniature light-bulb with attachment wires operates with 1.2 volts up to 1.5 volts (one battery) and does not require a lamp holder. The attached wires are about 10 cm (4 inches) long and the ends are stripped and tin coated for easy connection or... MSRP: Was: $40.00 Now: $15.00 Add to Cart Compare
SALE Quick view MiniScience | sku: DPSTB Knife Switch, DPST, Deluxe with black Knobs This Knife Switch is double pole single throw with screw type binding posts. The base has two screw holes for mounting on a board. Good for experiments and science projects. High quality, Deluxe version. The base measures about 53mm x 75mm. MSRP: Was: $7.10 Now: $5.99 Choose Options Compare
Quick view MiniScience | sku: 7-1850-1 SOLENOID / ELECTROMAGNET WITH IRON CORE SOLENOID / ELECTROMAGNET WITH IRON COREStudy the magnetic field of a current-carrying coil and discover how an iron core affects it. This device is used for many demonstrations involving electric magnets or solenoids. A plastic spool is wrapped with... MSRP: Now: $45.00 Add to Cart Compare SALE Quick view MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational Hand crank electric generator is an educational model to demonstrate how electricity is produced. The clear shell of this generator allows students to see how a combination of gears increase the number of rotations per minute (RPM) so that the small... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare SALE Quick view MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) This is the original design DPST (Double Pole Single Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. You can use it to turn off and on two... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) This is the original design SPDT (Single Pole Double Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. This switch is also known as a... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare SALE Quick view MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) Two alligator clips with plastic finger grips and connection screws. These alligator clips can be attached to the ends of wires gauge 14 up to gauge 28 using screw or by soldering. Comes as a pair. The price is for two alligator clips. (one red and one... MSRP: Was: $1.40 Now: $0.99 Choose Options Compare Quick view MiniScience | sku: METELECT8 Metal Electrodes Set of 8 For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: METELECT12 Metal Electrodes Set of 12 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 4-5 mm (1/8") thick... MSRP: Now: $32.00 Add to Cart Compare Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
SALE Quick view MiniScience | sku: HGEN1 Electric Generator, hand cranked with clear shell, educational Hand crank electric generator is an educational model to demonstrate how electricity is produced. The clear shell of this generator allows students to see how a combination of gears increase the number of rotations per minute (RPM) so that the small... MSRP: Was: $12.00 Now: $9.00 Add to Cart Compare
SALE Quick view MiniScience | sku: KSWITCH2 Knife Switch DPST (Brass contacts and Steel screws) This is the original design DPST (Double Pole Single Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. You can use it to turn off and on two... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare
SALE Quick view MiniScience | sku: KSWITCH12 Knife Switch SPDT (Brass contacts and Steel screws) This is the original design SPDT (Single Pole Double Throw) knife switch with brass contacts and steel screws. Traditionally it has been used in many vintage equipment but now is mainly used for education purpose. This switch is also known as a... MSRP: Was: $4.50 Now: $3.50 Choose Options Compare
SALE Quick view MiniScience | sku: ALCLIP50 Alligator Clips, Crocodile Clips, 50-mm long, one pair (red & black) Two alligator clips with plastic finger grips and connection screws. These alligator clips can be attached to the ends of wires gauge 14 up to gauge 28 using screw or by soldering. Comes as a pair. The price is for two alligator clips. (one red and one... MSRP: Was: $1.40 Now: $0.99 Choose Options Compare
Quick view MiniScience | sku: METELECT8 Metal Electrodes Set of 8 For use with electrovoltaic cells or in various other chemical, physics and chemistry experiments. Each metal electrode measures about 120mm x 18mm x 0.75mm (5" x 1/2" x 1/32"). Metals include Iron, Copper, Zinc, Brass, Aluminum, Bronze, Steel and... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: METELECT12 Metal Electrodes Set of 12 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 4-5 mm (1/8") thick... MSRP: Now: $32.00 Add to Cart Compare Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected × OK
Quick view MiniScience | sku: METELECT12 Metal Electrodes Set of 12 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 4-5 mm (1/8") thick... MSRP: Now: $32.00 Add to Cart Compare Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected
Quick view MiniScience | sku: METELECT11 Metal Electrodes Set of 11 For use with electrovoltaic cells or in various other chemical, physics and electricity experiments. Each metal electrode measures about 5" x 3/4" x 3/64" ( It is 12cm x 2cm x 1.2 mm in metric system). Carbon (graphite) is 5 mm (1/8") thick.This is the... MSRP: Now: $29.00 Add to Cart Compare 1 2 3 4 Next 1 2 3 4 Next Compare Selected
