SALE Quick view Details MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare
Quick view Details MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult MSRP: Now: $5.99 Add to Cart Compare Quick view Details MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) MSRP: Now: $12.00 Compare SALE Quick view Details MiniScience | sku: tech-cat Tech-Cat Catamaran MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view Details MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 MSRP: Now: $14.50 Choose Options Compare Quick view Details MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 MSRP: Now: $9.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_MT Mousetrap Car MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) MSRP: Now: $30.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PULLEY Pulley Motor Car kit MSRP: Now: $18.00 Choose Options Compare SALE Quick view Details MiniScience | sku: KITML Magnet Levitation Train Kit MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view Details MiniScience | sku: CAR_ELEC Electric Car Kit MSRP: Now: $30.00 Add to Cart Compare SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) MSRP: Now: $12.00 Compare SALE Quick view Details MiniScience | sku: tech-cat Tech-Cat Catamaran MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view Details MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 MSRP: Now: $14.50 Choose Options Compare Quick view Details MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 MSRP: Now: $9.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_MT Mousetrap Car MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) MSRP: Now: $30.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PULLEY Pulley Motor Car kit MSRP: Now: $18.00 Choose Options Compare SALE Quick view Details MiniScience | sku: KITML Magnet Levitation Train Kit MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view Details MiniScience | sku: CAR_ELEC Electric Car Kit MSRP: Now: $30.00 Add to Cart Compare SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
SALE Quick view Details MiniScience | sku: tech-cat Tech-Cat Catamaran MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare
Quick view Details MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 MSRP: Now: $14.50 Choose Options Compare Quick view Details MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 MSRP: Now: $9.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_MT Mousetrap Car MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) MSRP: Now: $30.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PULLEY Pulley Motor Car kit MSRP: Now: $18.00 Choose Options Compare SALE Quick view Details MiniScience | sku: KITML Magnet Levitation Train Kit MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view Details MiniScience | sku: CAR_ELEC Electric Car Kit MSRP: Now: $30.00 Add to Cart Compare SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 MSRP: Now: $9.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_MT Mousetrap Car MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) MSRP: Now: $30.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PULLEY Pulley Motor Car kit MSRP: Now: $18.00 Choose Options Compare SALE Quick view Details MiniScience | sku: KITML Magnet Levitation Train Kit MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view Details MiniScience | sku: CAR_ELEC Electric Car Kit MSRP: Now: $30.00 Add to Cart Compare SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details MiniScience | sku: CAR_MT Mousetrap Car MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) MSRP: Now: $30.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PULLEY Pulley Motor Car kit MSRP: Now: $18.00 Choose Options Compare SALE Quick view Details MiniScience | sku: KITML Magnet Levitation Train Kit MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view Details MiniScience | sku: CAR_ELEC Electric Car Kit MSRP: Now: $30.00 Add to Cart Compare SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) MSRP: Now: $30.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PULLEY Pulley Motor Car kit MSRP: Now: $18.00 Choose Options Compare SALE Quick view Details MiniScience | sku: KITML Magnet Levitation Train Kit MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view Details MiniScience | sku: CAR_ELEC Electric Car Kit MSRP: Now: $30.00 Add to Cart Compare SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) MSRP: Now: $19.00 Add to Cart Compare Quick view Details MiniScience | sku: CAR_PULLEY Pulley Motor Car kit MSRP: Now: $18.00 Choose Options Compare SALE Quick view Details MiniScience | sku: KITML Magnet Levitation Train Kit MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view Details MiniScience | sku: CAR_ELEC Electric Car Kit MSRP: Now: $30.00 Add to Cart Compare SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details MiniScience | sku: CAR_PULLEY Pulley Motor Car kit MSRP: Now: $18.00 Choose Options Compare SALE Quick view Details MiniScience | sku: KITML Magnet Levitation Train Kit MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view Details MiniScience | sku: CAR_ELEC Electric Car Kit MSRP: Now: $30.00 Add to Cart Compare SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
SALE Quick view Details MiniScience | sku: KITML Magnet Levitation Train Kit MSRP: Was: $29.00 Now: $25.00 Choose Options Compare
Quick view Details MiniScience | sku: CAR_ELEC Electric Car Kit MSRP: Now: $30.00 Add to Cart Compare SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
SALE Quick view MiniScience | sku: CHE_4WD Model Car Kit, 4 Wheel Drive This kit contains all the materials you need to assemble a model car. This is a challenging technology and engineering project for students in 5th grade and above. It does not contain any instructions. Students must identify the parts and discover the... MSRP: Was: $12.00 Now: $8.00 Add to Cart Compare
Quick view MiniScience | sku: MW_CATAPULT Catapult, Make a wooden catapult Ages 8 and up. Adult supervision required. This model builds into a working Catapult. Kit Includes laser cut wood parts, rubber band, stickers, and dowels. This project is a practical example of storing mechanical energy and releasing it as needed... MSRP: Now: $5.99 Add to Cart Compare Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view MiniScience | sku: CHE_PROP Air Propelled Car Model (Complete Kit Parts, No instructions) Model of air propelled car is used as a technology education project for students in grades 5 and above. This kit contains small screws and other parts that may be a choking hazard to younger children. Materials in this kit include a pre-cut and... MSRP: Now: $12.00 Compare SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
SALE Quick view MiniScience | sku: tech-cat Tech-Cat Catamaran Our twin hull Tech Cat Catamaran will put seaworthy success into your earth science and technology curriculum. Quick to construct and fun to run, the Tech-Cat Catamaran has three different power sources - sail, airboat and surface drive for you to... MSRP: Was: $14.99 Now: $9.00 Add to Cart Compare
Quick view MiniScience | sku: PPULLEYS5 Plastic Pulleys, set of 5 These pulleys are made of rigid colored plastic with deep V-grooves. They are balanced for free movement and have a 50 mm diameter. They are mounted on a steel frames with hooks at both ends. Sold in sets of 5. Available in 3 different colors... MSRP: Now: $14.50 Choose Options Compare Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view MiniScience | sku: CAMSET4 Plastic Cam, Set of 4 Cam is a wheel that is not round, or it is a round wheel that turns around an axle that is not at the center of the wheel. Cam is used to change the rotational movement into the reciprocating movement.The holes are about 2.6 mm (0.1 inches) in diameter,... MSRP: Now: $9.00 Add to Cart Compare Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view MiniScience | sku: CAR_MT Mousetrap Car A mousetrap powered car is a vehicle that uses a mouse trap for a motor and a string to transmit force. In this method one end of a string is attached or tied to the arm of the mousetrap and the other end of the string is wound around an axle. By winding... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view MiniScience | sku: KITTEG Thermoelectric Generator Kit (Essentials) (This kit will no longer include metal cans or tea cans. ) The Thermoelectric Generator is an experimental kit which demonstrates the direct conversion of heat into electrical energy using the Seebeck effect. The key component is the Peltier module... MSRP: Now: $30.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view MiniScience | sku: CAR_PROP Air Motor Car Kit (Car Propeller Kit) The motor and propeller work together to create air current and push the car forward. This kit includes: Electric motor Plastic propeller battery holder 4 wheels 2 axle rods Eye screw axle holders wood board for chassis Wood dowels for motor... MSRP: Now: $19.00 Add to Cart Compare Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view MiniScience | sku: CAR_PULLEY Pulley Motor Car kit This simple car kit explores movement, electricity and forces. It uses pulleys to transmit the force from the motor to the wheels. All parts are included and instructions are online. Pulley Motor Car Kit is a Science/ Engineering project or activity... MSRP: Now: $18.00 Choose Options Compare SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected
SALE Quick view MiniScience | sku: KITML Magnet Levitation Train Kit Discover the gravity defying effects of magnetism when you build a Magnetic Levitation Train with this kit. If you need additional magnetic strips or want to make your own kits, please use the product code MAGTAPE. This kit contains one neodymium... MSRP: Was: $29.00 Now: $25.00 Choose Options Compare
Quick view MiniScience | sku: CAR_ELEC Electric Car Kit This simple car kit explores movement, electricity and forces. All parts and instructions are included. This car uses pulleys to transfer force from the motor to the wheels. Instructions are available online. MSRP: Now: $30.00 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected
