Product Description
CU165: Copper Powder 99.3%, 150 Mesh
The most popular and widely used copper powder, produced by water atomization method followed by hydrogen reduction. Applications include production of copper compounds, catalyst in chemical formulations, abrasive wheels, carbon brushes, and more.
HTS Code: 7406.10.0000
NMFC: 30743
CAS: 7440-50-8
Note: Pure copper powders do not show continuity or conductivity when tested with a multimeter. This might be due to two reasons. One reason is the low voltage used for the test. The other reason is the presence of air and weak contacts between the particles. They will exhibit conductivity with higher voltage, when compacted, and when mixed with some oil or resin to form a paste.
Safety Data Sheet for Copper Powder
Key Features
- 99.3% pure copper
- Water atomized and hydrogen reduced
- Fine mesh for versatile use
- Suitable for a range of industrial applications
- Enhanced conductivity under specific conditions
Product Specifications
| Purity | 99.3% |
| Apparent Density | 2.7 g/cc |
| Nominal Mesh | -140 -325 mesh ratio > 50% |
| Applications | General purpose, brazing, chemical, electronics, etc. |
| Conductivity Note | Conductive under high voltage or when mixed with oil/resin |
Similar Products
- High-purity, fine-grain, silver powder
- Atomized aluminum powder, 99% purity
- Bronze powder, water-atomized, industrial grade
- Nickel powder, 99.5% pure, chemical applications
- Zinc dust, fine mesh, high purity
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
Perfect for industrial manufacturers, chemical processing companies, electronics producers, automotive parts manufacturers, and research and development laboratories.
